Vælg leveringsland

Yamaha EMX7 Power Mixer

3,50

Yamaha EMX7 Power Mixer

3,50
Power mix. Suitable for a wide range of uses which need exceptional sound quality and convenient operation, the EMX7 features high efficiency power amplifiers (delivering 710 W output per channel), with overload protection. A rugged enclosure, impact resistant metal chassis and integrated handles ensures both mixers are exceptionally durable,...
Læs mere
På vej 1 stk.
Anslået dato for varemodtagelse på lager 21.11.2024
7.739 kr
Power Mixer Yamaha EMX7 Power Mixer

Yamaha EMX7 Power Mixer

7.739 kr

Produktkode: EMX7 | ID: 232481

Yamaha EMX7 Power Mixer

Power mix. Suitable for a wide range of uses which need exceptional sound quality and convenient operation, the EMX7 features high efficiency power amplifiers (delivering 710 W output per channel), with overload protection. A rugged enclosure, impact resistant metal chassis and integrated handles ensures both mixers are exceptionally durable, with the versatile design easily adapting to horizontal or vertical placement. Features four mono and four mono / stereo input channels, allowing up to eight microphones and line-level input sources to be connected, with channel 4 able to be used with Hi-Z inputs. Both have two Aux Send connections for a monitoring system or external effect devices; stereo TRS phone jack outputs, speaker jacks which can be used with both TS phone and speakON plugs and REC OUT unbalanced RCA-pin output jacks. The EMX7 features a flex-type graphic equaliser Flex9GEQ. Dimensiosn: 465 x 308 x 325 mm. Weight: 9,5 kg

Yderligere beskrivelse på dit sprog er ikke tilgængelig endnu. Måske vil beskrivelsen på engelsk hjælpe dig i mellemtiden.

Specs

Outline

I/OInputsTOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Phantom power+48 V
OutputsSPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
Control and othersFOOT SWITCH : Effect Mute on/off
BusStereo: 1, AUX: 2 (Including FX)
Input Channel FunctionPAD30 dB (CH1-4)
Hi-ZSupported (CH4)
HPF80 Hz, -12 dB/oct. (CH1–3)
COMP1-knob COMP (CH1–4)
EQ HIGH10 kHz +15 dB / -15 dB (Shelving)
EQ MID2.5 kHz +15 dB / -15 dB (Peaking)
EQ LOW100 Hz +15 dB / -15 dB (Shelving)
On-board processorsDSPSPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor
On-board amplifiersMaximum output power @4ohms1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W
Maximum output power @8ohms1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W
Level Meter2 × 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK)

General specifications

Frequency responseInput to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortionInput to SPEAKERS: MIC/LINE =LINE (CH1–4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1–4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
Hum & noise levelEquivalent input noise-117 dBu (Noise is measured with A-weighting filter)
Residual output noiseInput to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
Crosstalk-85 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuitLoad protectionDC-fault
Amplifier protectionOver heat protection, Over current protection, Integral power protection
Power supply protectionOver heat protection, Over current protection
Power requirementsAC 100-240V, 50Hz/60Hz
Power consumption45 W (Idle) / 250 W (1/8 Power)
DimensionsW465 mm (18 5/16")
H308 mm (12 1/8")
D325 mm (12 13/16")
Net weight9.5 kg (20.9 lbs)
AccessoriesOwner’s Manual, Technical Specifications, AC power cord (2.5 m)
OptionsFoot switch: FC5, Rack-mount brackets: RK-EMX7
OthersOperating Temperature : 0 to +40℃

(0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω All level controls are at their maximum position if not specified.)


Input Characteristics

Input JackMIC/LINEHi-ZActual Load ImpedanceFor Use with NominalInput LevelConnector
Sensitivity *1Nominal Level (▼ Position) *2Max. Before Clip
CH 1–4XLRMIC-3 kΩ50–600 Ω Mics-60 dBu (0.775 mV)-43 dBu (5.48 mV)-15 dBu (138 mV)Combo jack *3 (Balanced)
LINE--30 dBu (24.5 mV)-13 dBu (173 mV)+15 dBu (4.36 V)
PhoneMIC-8 kΩ600 Ω Lines-50 dBu (2.45 mV)-33 dBu (17.3 mV)-5 dBu (436 mV)
LINE--20 dBu (77.5 mV)-3 dBu (548 mV)+25 dBu (13.8 V)
CH 4 (Hi-Z)PhoneMICON1 MΩ10 kΩ Lines-50 dBu (2.45 mV)-33 dBu (17.3 mV)-5 dBu (436 mV)Phone jack *4 (Unbalanced)
LINE-20 dBu (77.5 mV)-3 dBu (548 mV)+20 dBu (7.75 V)
CH 5/6, 7/8XLR--3 kΩ50–600 Ω Mics-60 dBu (0.775 mV)-43 dBu (5.48 mV)-15 dBu (138 mV)XLR-3-31 *5 (Balanced)
Phone10 kΩ600 Ω Lines-20 dBu (77.5 mV)-3 dBu (548 mV)+25 dBu (13.8 V)Phone jack *4 (Unbalanced)
CH 9/10, 11/12XLR--3 kΩ50–600 Ω Mics-60 dBu (0.775 mV)-43 dBu (5.48 mV)-15 dBu (138 mV)XLR-3-31 *5 (Balanced)
Pin10 kΩ600 Ω Lines-8 dBu (316 mV)+10 dBu (2.45 V)+25 dBu (13.8 V)RCA pin (Unbalanced)
CH 11/12Mini jack--10 kΩ600 Ω Lines-8 dBu (316 mV)+10 dBu (2.45 V)+25 dBu (13.8 V)Stereo mini jack *6 (Unbalanced)

(0 dBu = 0.775 Vrms)
*1 Sensitivity is the lowest level that will produce an output of +4 dBu (1.228 V) or the nominal output level when the unit is set to maximum gain. (All level controls are at their maximum position.)
*2 Level controls setting : Channel level controls are at their t position. Master level controls are at their maximum position.
*3 1&Sleeve = GND, 2&Tip = HOT, 3&Ring = COLD
*4 Tip = Signal, Sleeve = GND
*5 1 = GND, 2 = HOT, 3 = COLD
*6 Tip = LEFT, Ring = RIGHT, Sleeve = GND

Output Characteristics

Output JackActual Source ImpedanceFor Use with NominalOutput levelConnector
NominalMax. Before Clip
STEREO OUT L, R600 Ω10 kΩ Lines+4 dBu (1.228 V)+20 dBu (7.75 V)Phone jack *1 (Impedance balanced)
AUX SEND 1, 2600 Ω10 kΩ Lines+4 dBu (1.228 V)+20 dBu (7.75 V)Phone jack *1 (Impedance balanced)
REC OUT L, R600 Ω10 kΩ Lines-10 dBV (0.308 V)+18 dBV (7.75 V)RCA pin (Unbalanced)

(0 dBu = 0.775 Vrms 0 dBV = 1.00 Vrms)
*1 Tip = HOT, Ring = COLD, Sleeve = GND

Speaker Output Characteristics

Output JackActual Source ImpedanceFor Use with NominalOutput levelConnector
1 kHz THD+N < 1% (CEA2006)1 kHz THD+N < 10% (CEA2006)
SPEAKERS A, B< 0.1 Ω4 Ω Speakers600 W710 WspeakON NL4 *1 Phone jack *2
8 Ω Speakers400 W500 W

(0 dBu = 0.775 Vrms)
*1 1+ = Positive, 1- = Negative
*2 Tip = Positive, Sleeve = Negative

 

Funktioner

Antal indgangsporte

12

Egenskaber

Strøm

Kan monteres i stativ

Ja

FW

Nej

Effekt (Watt)

Indgange og udgange

AUX IN

2

Mikrofon indgang

8

Akustik

Mikrofonkanal EQ

Effekter

Indbyggede effekter

Ja

Strømforsyning

Strømforsyning

240 V

Tilbehør

UK/EU Strømforsyning er inkluderet

Nej

Land

Lavet i

Malaysia

3,50 / 5

Baseret på antallet af anmeldelser: 3

5 2
4 0
3 0
2 0
1 1

Alle anmeldelser kommer fra verificerede kunder, der tidligere har købt et produkt hos os.

L

Luboš K.

cz Flag

Tjekkiske Republik

21.04.2024

Překvapila mě kvalita zvuku a především výkon. Na vystoupení se přítomní muzikanti chodí dívat na co to hrajem, že je tak dobrý zvuk. Koupil bych si to znovu.

Automatisk oversættelse

Denne anmeldelse kan ikke oversættes.
J

Josef B.

cz Flag

Tjekkiske Republik

22.03.2023

super

Automatisk oversættelse

Denne anmeldelse kan ikke oversættes.
K

Kunde

hu Flag

Ungarn

19.10.2017

Bedømt variant

senkinek ,nem ajánlom, egy katasztrofa nem felelmeg a megadott paramétereknek

Automatisk oversættelse

Denne anmeldelse kan ikke oversættes.