Produktkode: RED-3 | ID: 401537
Both the Blue3 and Red3 use a four piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Red3 are hand selected from Blue3 production runs which meet higher test specifications. Approximately 10% of the run usually exhibits these specs and become a Red3.
Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.
Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.
The Blue3 & Red3 are all hand assembled by Grado Labs team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, they were able to have a trickle down of technology and bring a new technique to the Blue3 & Red3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Grado Labs coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.
As in all Grado phono cartridges the Blue3 & Red3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Blue3 & Red3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.
Form
Sporingskraft
Sporingskraft er anbefalet
1,5 g
Frekvensrespons
10 Hz - 55 kHz
Overholdelse
20
Impedance (ohm)
475
Den anbefalede belastningsmodstand
47 kOhm
Kanaladskillelse ved 1 kHz
30 dB
Pakkemængde (stk.)
1
Spænding
Vægt
5,5 g
Lavet i
USA
Alle anmeldelser kommer fra verificerede kunder, der tidligere har købt et produkt hos os.